The pressure of the hydraulic system is generated by the extrusion of the load on the hydraulic oil, so the pressure of the hydraulic system depends on the load. It can be known from the balance of forces, the thrust of the cylinder = load, the thrust of the cylinder = the working pressure of the hydraulic oil * the working area of the cylinder, that is, the working pressure

1. Design Our designers decide on materials, coatings, seals and other specialized components based on the environment in which the hydraulic cylinder will be used, ensuring that the design meets the various requirements of their industry. 2. Machine Center After the design was complete, our engineers began producing the hydraulic cylinder. Our production equipments include: DOSHAAN machine center, CNC Lather, TACCHI skiving roller burnishing machine etc. Welding technology certificates are

Hello everyone, this article is about the common faults of hydraulic cylinders and the corresponding maintenance methods. Fault phenomenon 1: The cylinder does not work Fault reasons and solutions: (1) Due to the blockage of the oil circuit, the pressure oil of the system does not enter the oil cylinder at all, and the oil circuit needs to be cleared at this time; (2) Poor installation and connection may cause